Short answer: Security camera storage depends primarily on camera bitrate, number of cameras, recording hours, retention period, codec, and recording mode. Resolution matters because higher-resolution cameras generally require higher bitrates, but resolution alone cannot tell you how much storage you need.
Quick Security Camera Storage Calculator
| Input | What You Need to Know |
|---|---|
| Number of cameras | How many cameras will record? |
| Bitrate | Average Mbps per camera |
| Recording hours | Hours recorded per day |
| Retention | How many days of footage should be kept? |
| Recording mode | Continuous, scheduled or motion/event |
| Codec | H.264, H.265 or smart codec |
Security Camera Storage Formula
The simplest continuous-recording formula is:
Storage (GB) ≈ Bitrate (Mbps) × 10.8 × Recording Days × Number of Cameras
The 10.8 factor comes from converting megabits per second into gigabytes over a 24-hour period.
One 1 Mbps stream running continuously produces approximately:
1 × 10.8 = 10.8 GB/day
Therefore:
| Average Bitrate | Approx. Storage per Camera per Day | Approx. Storage per 30 Days |
|---|---|---|
| 1 Mbps | 10.8 GB | 324 GB |
| 2 Mbps | 21.6 GB | 648 GB |
| 4 Mbps | 43.2 GB | 1.30 TB |
| 6 Mbps | 64.8 GB | 1.94 TB |
| 8 Mbps | 86.4 GB | 2.59 TB |
| 10 Mbps | 108 GB | 3.24 TB |
| 12 Mbps | 129.6 GB | 3.89 TB |
| 16 Mbps | 172.8 GB | 5.18 TB |
These are mathematical estimates based on continuous bitrate. Actual disk usage can differ because of variable bitrate, metadata, audio, filesystem overhead, recording gaps and other system factors.
How to Calculate Security Camera Storage
Use these five steps.
- Find the camera’s average or configured bitrate.
- Determine how many hours per day the camera records.
- Determine the number of cameras.
- Determine how many days of footage you want to retain.
- Add a practical capacity margin.
Example: Four Cameras at 5 Mbps
Suppose you have:
- 4 cameras
- 5 Mbps per camera
- 24-hour recording
- 30-day retention
Calculation:
5 × 10.8 × 4 × 30 = 6,480 GB
That equals approximately:
6.48 TB of raw video storage
You would therefore select a storage configuration larger than the mathematical minimum rather than attempting to fill the drive to 100% capacity.
Security Camera Storage Calculator for Different Camera Counts
The following table assumes 24/7 continuous recording for 30 days.
| Cameras | 2 Mbps Each | 4 Mbps Each | 8 Mbps Each | 12 Mbps Each |
|---|---|---|---|---|
| 1 | 0.65 TB | 1.30 TB | 2.59 TB | 3.89 TB |
| 2 | 1.30 TB | 2.59 TB | 5.18 TB | 7.78 TB |
| 4 | 2.59 TB | 5.18 TB | 10.37 TB | 15.55 TB |
| 8 | 5.18 TB | 10.37 TB | 20.74 TB | 31.10 TB |
| 16 | 10.37 TB | 20.74 TB | 41.47 TB | 62.21 TB |
| 32 | 20.74 TB | 41.47 TB | 82.94 TB | 124.42 TB |
Important: This table demonstrates why bitrate is so important. A 16-camera system at 8 Mbps per camera requires roughly four times as much storage as the same number of cameras at 2 Mbps.
How Much Storage Does One Security Camera Need?
There is no single answer because cameras can operate at very different bitrates.
For continuous 24/7 recording:
| Average Bitrate | 1 Day | 7 Days | 14 Days | 30 Days | 90 Days |
|---|---|---|---|---|---|
| 2 Mbps | 21.6 GB | 151 GB | 302 GB | 648 GB | 1.94 TB |
| 4 Mbps | 43.2 GB | 302 GB | 605 GB | 1.30 TB | 3.89 TB |
| 6 Mbps | 64.8 GB | 454 GB | 907 GB | 1.94 TB | 5.83 TB |
| 8 Mbps | 86.4 GB | 605 GB | 1.21 TB | 2.59 TB | 7.78 TB |
| 12 Mbps | 129.6 GB | 907 GB | 1.81 TB | 3.89 TB | 11.66 TB |
How Much Storage Does a 1080p Security Camera Need?
A 1080p camera does not have a fixed storage requirement. The bitrate configured by the manufacturer or installer is more useful for calculation.
As a planning example, a 1080p camera using approximately 2–4 Mbps would require roughly:
| 1080p Bitrate | Per Day | 30 Days |
|---|---|---|
| 2 Mbps | 21.6 GB | 648 GB |
| 3 Mbps | 32.4 GB | 972 GB |
| 4 Mbps | 43.2 GB | 1.30 TB |
| 5 Mbps | 54 GB | 1.62 TB |
These are planning examples rather than universal 1080p requirements. Always use the camera’s actual configured bitrate when possible.
How Much Storage Does a 2K Security Camera Need?
2K cameras commonly require more storage than 1080p cameras because they contain more pixels and may be configured at higher bitrates.
For example, at 4 Mbps:
4 × 10.8 = 43.2 GB/day
For 30 days:
43.2 × 30 = 1,296 GB
or approximately 1.3 TB per camera.
How Much Storage Does a 4K Security Camera Need?
4K cameras can consume substantially more storage than 1080p cameras because they contain approximately four times as many pixels as 1080p.
However, storage does not automatically increase by exactly four times. The actual result depends on bitrate, compression, frame rate and image complexity.
For example, a 4K camera averaging 8 Mbps requires:
8 × 10.8 = 86.4 GB/day
For 30 days:
86.4 × 30 = 2,592 GB
That is approximately 2.6 TB per camera.
For detailed 4K-specific calculations, see 4K Security Camera Storage Requirements.
1080p vs 2K vs 4K Storage
| Resolution | Example Bitrate | Approx. GB/Day | Approx. 30-Day Storage |
|---|---|---|---|
| 1080p | 2 Mbps | 21.6 GB | 0.65 TB |
| 1080p | 4 Mbps | 43.2 GB | 1.30 TB |
| 2K / 4MP | 4 Mbps | 43.2 GB | 1.30 TB |
| 2K / 4MP | 6 Mbps | 64.8 GB | 1.94 TB |
| 4K / 8MP | 8 Mbps | 86.4 GB | 2.59 TB |
| 4K / 8MP | 12 Mbps | 129.6 GB | 3.89 TB |
The table illustrates why using resolution alone to estimate storage can be misleading. Bitrate is the number that directly determines how much video data is written.
How Codec Affects Storage
The codec determines how efficiently the video is compressed.
| Codec | Typical Storage Effect | Use in Modern Systems |
|---|---|---|
| H.264 | Higher storage at comparable quality | Older and widely compatible systems |
| H.265 / HEVC | Generally more efficient than H.264 | Common in modern 4K cameras |
| Smart codecs | Can further reduce bitrate depending on scene | Useful for bandwidth and storage optimization |
Do not assume a fixed percentage of savings for every camera. Actual savings depend on the implementation, scene complexity, frame rate, quality settings and encoder configuration.
The most accurate approach is to use the actual bitrate produced by the camera rather than applying a generic H.264-to-H.265 percentage.
See H.264 vs H.265 if you need to compare codecs specifically for storage planning.
Bitrate Is More Important Than Resolution for Storage
Resolution tells you how many pixels are captured. Bitrate tells you how much compressed data is being written.
For storage calculations:
Bitrate → storage consumption
Therefore, two 4K cameras can require very different amounts of storage.
| Camera A | Camera B |
|---|---|
| 4K | 4K |
| 6 Mbps | 12 Mbps |
| 64.8 GB/day | 129.6 GB/day |
| 1.94 TB/30 days | 3.89 TB/30 days |
Both cameras have the same nominal resolution, but Camera B requires approximately twice the storage.
For this reason, when available, use the camera’s actual configured bitrate rather than estimating storage from resolution alone.
Constant Bitrate vs Variable Bitrate
Security cameras may use CBR or VBR.
| Mode | How It Works | Storage Behavior |
|---|---|---|
| CBR | Attempts to maintain a relatively constant bitrate | More predictable storage |
| VBR | Bitrate changes according to scene complexity | Storage varies with activity |
With VBR, a busy parking lot, street or entrance can consume more data than a relatively static room.
That means a theoretical storage calculation should include reasonable headroom rather than assuming the lowest possible bitrate will continue indefinitely.
How Frame Rate Affects Storage
Frame rate is another important factor.
A camera recording at 30 frames per second produces twice as many frames as one recording at 15 fps, although the actual bitrate does not necessarily double because modern video compression uses temporal redundancy and other encoding techniques.
| Frame Rate | General Effect |
|---|---|
| 10 fps | Lower data requirement; less smooth motion |
| 15 fps | Common compromise for surveillance |
| 20 fps | Smoother motion |
| 25/30 fps | Better motion representation but potentially higher bitrate |
When calculating storage, use the bitrate associated with the actual frame-rate setting whenever possible.
Continuous Recording vs Motion Recording
Recording mode can have a major impact on storage.
Continuous Recording
The camera records continuously, 24 hours a day.
This provides the most complete recording history but uses the most storage.
Motion/Event Recording
The system records only when a motion or event condition is detected.
This can significantly reduce storage, but the reduction depends on how often events occur, detection settings, object types, scene activity and pre/post-event recording.
| Recording Mode | Storage Demand | Evidence Coverage |
|---|---|---|
| 24/7 continuous | Highest | Complete timeline |
| Scheduled | Medium to high | Depends on schedule |
| Motion/event | Lower | Depends on detection accuracy |
| Hybrid | Variable | Can prioritize important areas |
Do not simply assume that motion recording will use a fixed percentage of the storage required for continuous recording. The actual recording duty cycle depends on the environment.
Security Camera Storage With Motion Recording
If a camera records for only a fraction of each day, the formula can be modified.
Storage ≈ Bitrate × 10.8 × Cameras × Days × Recording Factor
For example, if a camera records for approximately 25% of the time:
Recording factor = 0.25
A 5 Mbps camera would therefore consume approximately:
5 × 10.8 × 0.25 = 13.5 GB/day
However, treat the recording factor as an estimate. It is better to measure actual recording activity after deployment.
How Much Storage Do 4 Cameras Need?
For four cameras recording continuously for 30 days:
| Bitrate per Camera | Total Bitrate | 30-Day Storage |
|---|---|---|
| 2 Mbps | 8 Mbps | 2.59 TB |
| 4 Mbps | 16 Mbps | 5.18 TB |
| 6 Mbps | 24 Mbps | 7.78 TB |
| 8 Mbps | 32 Mbps | 10.37 TB |
| 12 Mbps | 48 Mbps | 15.55 TB |
This is why a four-camera system can require anything from a relatively small drive to a multi-terabyte configuration depending on the actual recording bitrate and retention target.
How Much Storage Do 8 Cameras Need?
| Bitrate per Camera | 8 Cameras | 30-Day Storage |
|---|---|---|
| 2 Mbps | 16 Mbps total | 5.18 TB |
| 4 Mbps | 32 Mbps total | 10.37 TB |
| 6 Mbps | 48 Mbps total | 15.55 TB |
| 8 Mbps | 64 Mbps total | 20.74 TB |
| 12 Mbps | 96 Mbps total | 31.10 TB |
How Much Storage Do 16 Cameras Need?
| Bitrate per Camera | 16 Cameras | 30-Day Storage |
|---|---|---|
| 2 Mbps | 32 Mbps total | 10.37 TB |
| 4 Mbps | 64 Mbps total | 20.74 TB |
| 6 Mbps | 96 Mbps total | 31.10 TB |
| 8 Mbps | 128 Mbps total | 41.47 TB |
| 12 Mbps | 192 Mbps total | 62.21 TB |
Large systems therefore need to consider not only disk capacity but also NVR incoming bandwidth, storage interfaces, HDD count, RAID configuration where applicable, and network throughput.
How Many Days of Footage Should You Store?
There is no universal retention period for every household or business.
| Retention | Typical Use Case |
|---|---|
| 3–7 days | Basic short-term monitoring |
| 7–14 days | Smaller residential systems |
| 14–30 days | Common home and small-business planning range |
| 30–60 days | Businesses needing longer investigation windows |
| 60–90+ days | Higher-retention environments and specific operational requirements |
Your actual requirement should be based on how quickly incidents are normally discovered, operational requirements, risk, and any applicable legal or organizational retention policies.
Storage Calculation for Different Retention Periods
For one camera at 8 Mbps:
| Retention | Approx. Storage |
|---|---|
| 1 day | 86.4 GB |
| 7 days | 604.8 GB |
| 14 days | 1.21 TB |
| 30 days | 2.59 TB |
| 60 days | 5.18 TB |
| 90 days | 7.78 TB |
NVR Storage vs Usable Storage
When selecting an NVR hard drive, do not assume that the manufacturer’s advertised capacity will translate into exactly the same amount of usable video-storage space.
Some capacity is consumed by:
- Filesystem overhead
- NVR operating functions
- Database/indexing information
- Metadata
- System partitions
- RAID/parity overhead where applicable
- Reserved free space
For a real installation, size the storage above the theoretical video requirement rather than treating the mathematical minimum as the recommended drive size.
How Much Extra Storage Should You Buy?
A practical storage design should include some headroom.
For example, if your theoretical calculation produces:
7.2 TB
Buying exactly 7.2 TB of usable capacity would leave little room for bitrate variation, system overhead or future changes.
A practical planning approach is to add approximately 15–25% capacity margin, depending on the system and how conservative you want the design to be.
For example:
7.2 TB × 1.20 = 8.64 TB
You would then select an available storage configuration above that requirement.
Storage Headroom Example
| Theoretical Requirement | 15% Margin | 25% Margin |
|---|---|---|
| 2 TB | 2.30 TB | 2.50 TB |
| 4 TB | 4.60 TB | 5.00 TB |
| 6 TB | 6.90 TB | 7.50 TB |
| 8 TB | 9.20 TB | 10 TB |
| 12 TB | 13.80 TB | 15 TB |
| 20 TB | 23 TB | 25 TB |
Storage for NVR, NAS, microSD and Cloud
The underlying video-storage calculation is fundamentally the same regardless of where the footage is stored.
| Storage Type | Main Capacity Consideration | Important Factor |
|---|---|---|
| NVR HDD | Total camera bitrate × retention | HDD capacity and NVR compatibility |
| NAS | Total recording workload | Drive capacity, RAID and network performance |
| microSD | Camera bitrate × local retention | Card capacity and write endurance |
| Cloud | Uploaded video volume and retention | Subscription/storage limits and upload bandwidth |
The main difference is not the mathematics but how the storage is implemented, retained, protected and paid for.
How Audio Affects Storage
Audio usually contributes far less data than high-resolution video, but it is not completely free from a storage perspective.
If cameras record audio, include it when calculating the total storage requirement, particularly in large systems with many microphones or higher-quality audio streams.
How Scene Activity Affects Storage
Scene complexity can affect variable-bitrate video.
A static interior scene may compress much more efficiently than:
- A busy road
- A parking lot
- A crowded entrance
- Trees moving in strong wind
- Rain or snow
- Large areas of moving foliage
- High levels of nighttime noise
Therefore, two cameras with identical resolution and nominal settings can produce different real-world storage requirements.
Night Vision and Storage
Nighttime operation can also affect bitrate indirectly.
Low-light noise and moving objects can make video harder to compress efficiently. A camera operating in a noisy nighttime scene may therefore produce different storage consumption from the same camera in a clean, well-lit environment.
How to Get the Most Accurate Storage Estimate
The best method is to use the camera’s actual measured bitrate.
- Install or configure the camera.
- Set the intended resolution.
- Set the intended frame rate.
- Select the desired codec.
- Configure image-quality and bitrate settings.
- Observe the actual stream bitrate.
- Record the average bitrate over representative scenes.
- Use that bitrate in the storage formula.
This is more accurate than relying on a generic “4K uses X TB” table.
Security Camera Storage Calculator: Manual Method
You can calculate almost any surveillance storage requirement with this sequence.
Step 1: Calculate Daily Storage Per Camera
Daily storage = Bitrate × 10.8
Step 2: Calculate Storage Per Camera
Camera storage = Daily storage × Retention days
Step 3: Calculate Total Storage
Total storage = Camera storage × Number of cameras
Step 4: Add Headroom
Required capacity = Calculated storage × Headroom factor
Worked Example: 8-Camera 4K Home Security System
Suppose you have:
- 8 cameras
- 4K resolution
- 8 Mbps average bitrate
- H.265
- 24/7 recording
- 30-day retention
Daily storage:
8 × 10.8 = 86.4 GB per camera per day
Eight cameras:
86.4 × 8 = 691.2 GB/day
Thirty days:
691.2 × 30 = 20,736 GB
Therefore:
≈ 20.7 TB of raw storage
Adding a 20% planning margin:
20.7 × 1.20 ≈ 24.9 TB
A real installation would therefore need to be designed around an available storage configuration comfortably above the theoretical requirement, while also considering NVR drive limits and usable capacity.
Worked Example: Four 1080p Cameras
Suppose each camera averages 3 Mbps.
Daily storage per camera:
3 × 10.8 = 32.4 GB
Four cameras:
32.4 × 4 = 129.6 GB/day
For 30 days:
129.6 × 30 = 3,888 GB
That is approximately:
3.9 TB
Adding 20% planning margin gives approximately:
4.7 TB
Storage Comparison: Continuous vs Motion Recording
| Factor | Continuous | Motion/Event |
|---|---|---|
| Storage usage | Highest | Usually lower |
| Recording coverage | Complete | Event dependent |
| Storage prediction | Easy | More variable |
| Best for | Complete incident history | Storage-efficient monitoring |
| Risk | Higher storage cost | Missed/incorrectly detected events possible |
What Happens When the NVR Runs Out of Storage?
Most NVR systems are designed to use overwrite recording.
When the drive becomes full, the oldest footage is automatically deleted or overwritten to make room for new recordings.
This creates a rolling retention window.
For example, if your system can store approximately 20 days of footage, it may continuously retain roughly the most recent 20 days while older footage is overwritten.
Therefore, an undersized hard drive does not necessarily stop recording—it can simply shorten your effective retention period.
How to Estimate Actual Retention From Your Existing Drive
If you already have an NVR, you can estimate the retention period from your available storage.
Rearrange the formula:
Retention days ≈ Storage (GB) ÷ [Bitrate × 10.8 × Cameras]
Example:
Suppose you have:
- 4 cameras
- 4 Mbps each
- 4,000 GB usable storage
Daily usage:
4 × 10.8 × 4 = 172.8 GB/day
Approximate retention:
4,000 ÷ 172.8 ≈ 23 days
Actual retention may differ because of variable bitrate and system overhead.
Storage Calculation for 24/7 Recording
For continuous recording, use:
Storage (TB) ≈ Bitrate × 10.8 × Cameras × Days ÷ 1,000
Example:
8 Mbps × 10.8 × 8 cameras × 30 days ÷ 1,000
≈ 20.7 TB
Storage Calculation for Scheduled Recording
If a camera records for only a specific number of hours each day, use:
Storage (GB) ≈ Bitrate × 0.45 × Hours/Day × Cameras × Days
The 0.45 factor is derived from converting Mbps to GB over an hour.
For example, 4 Mbps recorded for 12 hours per day:
4 × 0.45 × 12 = 21.6 GB/day
This is approximately half the storage of continuous 24-hour recording at the same bitrate.
Quick Security Camera Storage Reference
| System | Assumed Bitrate | 30-Day Continuous Storage |
|---|---|---|
| 1 × 1080p | 2 Mbps | 0.65 TB |
| 4 × 1080p | 2 Mbps | 2.59 TB |
| 8 × 1080p | 2 Mbps | 5.18 TB |
| 4 × 2K | 4 Mbps | 5.18 TB |
| 8 × 2K | 4 Mbps | 10.37 TB |
| 4 × 4K | 8 Mbps | 10.37 TB |
| 8 × 4K | 8 Mbps | 20.74 TB |
| 16 × 4K | 8 Mbps | 41.47 TB |
These are mathematical planning examples, not universal storage recommendations. The actual bitrate should always take priority.
Practical Storage Buying Checklist
- ☐ Count all recording cameras.
- ☐ Find each camera’s configured bitrate.
- ☐ Check resolution and frame rate.
- ☐ Check whether H.264 or H.265 is being used.
- ☐ Determine whether recording is continuous or event-based.
- ☐ Decide your required retention period.
- ☐ Calculate total raw storage.
- ☐ Add storage headroom.
- ☐ Check the NVR’s maximum supported HDD capacity.
- ☐ Check the number of HDD bays.
- ☐ Consider whether RAID is appropriate for the installation.
- ☐ Use surveillance-oriented storage for systems with continuous recording workloads.
- ☐ Recalculate storage if camera bitrate or frame rate changes.
Common Security Camera Storage Mistakes
1. Calculating Storage From Resolution Alone
“4K needs X TB” is an oversimplification. Bitrate is the critical storage variable.
2. Ignoring Retention Period
Doubling retention from 15 to 30 days approximately doubles the storage requirement when all other variables remain constant.
3. Forgetting the Number of Cameras
Storage scales approximately linearly with camera count.
4. Assuming Motion Recording Uses a Fixed Percentage
Motion activity varies by location and time. A busy driveway can generate substantially more recordings than an empty backyard.
5. Filling the Drive to Its Theoretical Maximum
Allow capacity for system overhead, bitrate variation and future changes.
6. Ignoring Frame Rate
Frame rate affects the amount of visual information being encoded and can affect the resulting bitrate.
7. Using Generic Bitrate Numbers When Actual Data Is Available
If the camera or NVR provides actual bitrate statistics, use them. Real measurements are more useful than generic resolution-based estimates.
FAQs
How much storage does a security camera need for 30 days?
It depends on bitrate. At 4 Mbps, one camera recording continuously requires approximately 1.3 TB for 30 days. At 8 Mbps, it requires approximately 2.6 TB.
How much storage does a 4K security camera need?
A 4K camera’s storage requirement depends on its bitrate. At 8 Mbps continuously, one camera uses approximately 86.4 GB per day or 2.6 TB over 30 days.
Is 1TB enough for security cameras?
It can be enough for a small system with low bitrate, short retention or motion recording. For example, one camera at 2 Mbps requires approximately 648 GB for 30 days of continuous recording.
How much storage do four security cameras need?
At 4 Mbps per camera and 30-day continuous recording, four cameras require approximately 5.2 TB. At 8 Mbps each, the requirement rises to approximately 10.4 TB.
How much storage do eight 4K cameras need?
If each camera averages 8 Mbps and records continuously, eight cameras require approximately 20.7 TB for 30 days before adding practical capacity margin.
Does H.265 reduce security-camera storage?
Yes. H.265 is generally more efficient than H.264 at comparable image quality, although the exact storage reduction varies by encoder, scene and configuration.
Does 4K use four times more storage than 1080p?
Not necessarily. 4K has approximately four times the pixels of 1080p, but storage depends on bitrate rather than pixel count alone. A particular 4K camera might use two, three or four times the bitrate of a particular 1080p camera depending on configuration.
Does motion recording save storage?
Usually, yes, because the camera records for fewer hours. The amount saved depends on how frequently motion or other recording triggers occur.
How much extra storage should I allow?
A practical planning margin of roughly 15–25% is reasonable for many installations, although the appropriate margin depends on bitrate variability, system overhead and future expansion.
Does night vision use more storage?
It can. Low-light noise, moving objects and scene complexity can increase the bitrate of a variable-bitrate stream. The effect depends on the camera and environment.
Is NVR storage the same as cloud storage?
The underlying video-data requirement is similar, but the implementation is different. An NVR uses local storage, while cloud systems transmit footage to remote infrastructure and may impose subscription, retention or upload requirements.
Can I calculate storage from the camera’s bitrate?
Yes. Bitrate is one of the most reliable inputs for storage calculation. For continuous recording, multiply Mbps by 10.8 to estimate GB per camera per day, then multiply by camera count and retention days.
Final Verdict
Security camera storage should be calculated from bitrate, recording time, camera count and retention—not simply from resolution.
The most useful formula for a 24/7 system is:
Storage (GB) ≈ Bitrate (Mbps) × 10.8 × Cameras × Days
For example:
8 Mbps × 10.8 × 8 cameras × 30 days ≈ 20.7 TB
From there, add a practical capacity margin and check the actual usable capacity of your NVR, NAS or other storage system.
For the most accurate result, use the actual configured bitrate of your cameras. Resolution, codec, frame rate, scene activity and recording mode influence that bitrate, while retention determines how long the resulting data must remain available.
The best storage system is therefore not the one with the biggest hard drive—it is the one correctly sized for your camera bitrates, recording schedule, retention requirement and future expansion.
Security Camera Storage Guides
- How Many Days of Security Camera Footage Should You Keep?
- Security Camera Storage: Continuous vs Motion Recording
- Security Camera Bitrate: How It Affects Storage Requirements
- 4K Security Camera Storage Requirements
- Security Camera NVR Hard Drive Guide: How Many TB Do You Need?
- NVR vs NAS for Security Camera Storage
- Cloud vs Local Storage for Security Cameras
- Hybrid Security Camera Storage: Local + Cloud Backup Explained
Security Camera Sub-Pillars

About the Author
ManBearPig is a part-man, part-bear, part-pig creature and a full-time expert on global warming—mostly because he has personally experienced the consequences of being extremely, extremely, super cereal.
When he isn’t roaming the wilderness, terrorizing unsuspecting humans, or demanding that people take climate change seriously, ManBearPig studies rising temperatures, melting ice, extreme weather, carbon emissions, and other inconvenient signs that the planet may not be particularly happy with us.
His research philosophy is simple:
“I’m super cereal.”
ManBearPig believes climate change is too important to discuss without facts—and too ridiculous to discuss without a little humor. Through this website, he explores global warming, climate science, environmental changes, energy, and the strange ways humans respond when their own planet starts sending them warning signals.
He has no university degree, no laboratory, and absolutely no intention of becoming a respectable academic.
But he does have hooves, claws, a snout, and an unusually strong opinion about melting ice.
