How Much Water Does a Reverse Osmosis System Waste?

Reverse osmosis can provide excellent drinking-water treatment, but it has one important disadvantage compared with many conventional filters: it produces reject water.

For every gallon of treated water an RO system produces, some additional water is sent down the drain. How much water is wasted depends heavily on the system’s design, operating conditions, efficiency, storage arrangement, and maintenance.

According to the U.S. Environmental Protection Agency (EPA), a typical point-of-use RO system can generate five gallons or more of reject water for every gallon of treated water. Some inefficient systems can generate as much as 10 gallons of reject water per gallon of treated water. By comparison, an EPA WaterSense-labeled point-of-use RO system must send 2.3 gallons or less down the drain for every gallon of treated water produced.

That difference can become significant over a year.

This guide explains how to calculate RO water waste, how tank and tankless systems differ, what recovery and efficiency mean, how much water a household may waste, and how to choose a more efficient RO system in the United States.

Quick Answer: How Much Water Does an RO System Waste?

RO System Type Approximate Reject Water What It Means
Typical POU RO 5+ gallons per gallon treated Substantial water consumption
Inefficient POU RO Up to about 10 gallons per gallon treated Very high water waste
WaterSense-labeled POU RO 2.3 gallons or less per gallon treated More efficient RO operation
Non-RO carbon filter Normally no RO reject stream Generally much lower water consumption during treatment

These are useful comparison figures, not guarantees for every individual system. Actual household water use depends on the particular system and its operating conditions.

What Does “RO Water Waste” Actually Mean?

Calling RO reject water “waste” can be slightly misleading.

The water sent down the drain is not necessarily contaminated wastewater in the conventional sense. It is the concentrate or reject stream produced by the membrane separation process.

When water passes through an RO membrane, the system creates two streams:

  • Permeate: treated water that passes through the membrane.
  • Concentrate: water that carries away substances retained by the membrane.

EPA uses the terms reject water, concentrate, and brine for this stream.

The important question for homeowners is therefore not simply whether RO creates reject water. It does.

The better question is:

How much reject water does this particular RO system produce for each gallon of useful treated water?

What Is the RO Waste-to-Product Ratio?

The waste-to-product ratio tells you how much water the system sends to the drain for every gallon of treated water it produces.

For example:

Waste-to-Product Ratio Meaning
10:1 10 gallons reject for 1 gallon treated
5:1 5 gallons reject for 1 gallon treated
3:1 3 gallons reject for 1 gallon treated
2.3:1 2.3 gallons reject for 1 gallon treated
1:1 1 gallon reject for 1 gallon treated

A lower number is better from a water-efficiency perspective.

EPA’s WaterSense specification defines the waste-to-product ratio as the number of gallons of water discharged for every gallon of treated water produced.

Simple Example: A 5:1 RO System

Suppose your household uses 2 gallons of RO water per day.

If your RO system wastes 5 gallons for every gallon treated:

2 gallons treated × 5 gallons reject = 10 gallons reject water per day.

Over one year:

10 × 365 = 3,650 gallons of reject water.

So a household consuming only two gallons of RO water each day could generate thousands of gallons of reject water annually.

How Much Water Is Wasted at Different RO Ratios?

The following examples assume the household produces 2 gallons of treated RO water per day.

Waste Ratio Daily Reject Annual Reject
10:1 20 gallons 7,300 gallons
5:1 10 gallons 3,650 gallons
4:1 8 gallons 2,920 gallons
3:1 6 gallons 2,190 gallons
2.3:1 4.6 gallons 1,679 gallons
1:1 2 gallons 730 gallons

This illustrates why efficiency matters even when the household does not consume a large amount of RO water.

What Is the EPA WaterSense RO Requirement?

EPA created a WaterSense specification specifically for point-of-use reverse osmosis systems.

Under the current WaterSense specification, qualifying RO systems must send no more than 2.3 gallons of water down the drain for every gallon of treated water they produce. WaterSense-labeled products are independently certified to EPA’s efficiency and performance requirements.

This is important because “RO” by itself does not tell you how efficiently the system uses water.

Two RO systems can provide similar treatment technology while having substantially different water-use performance.

How Much Water Does a Typical RO System Waste?

EPA currently describes a typical point-of-use RO system as generating five gallons or more of reject water for every gallon of treated water.

EPA also notes that some inefficient units can generate up to approximately 10 gallons of reject water per gallon of treated water.

That makes the difference between an older or inefficient system and a more efficient system potentially substantial.

How Much RO Water Waste Does a Household Generate Per Year?

You can calculate annual reject water using a simple formula:

Annual reject water = daily treated-water use × 365 × waste-to-product ratio

For example, if a household uses 3 gallons of treated RO water each day and the system has a 5:1 waste ratio:

3 × 365 × 5 = 5,475 gallons of reject water per year.

That is only the reject stream. It does not represent the total household water consumption.

RO Waste Calculator

Daily RO Water Used Waste Ratio Annual Reject Water
1 gallon/day 5:1 1,825 gallons/year
2 gallons/day 5:1 3,650 gallons/year
3 gallons/day 5:1 5,475 gallons/year
4 gallons/day 5:1 7,300 gallons/year
5 gallons/day 5:1 9,125 gallons/year

The actual number can be considerably lower if you choose a more efficient RO system.

How Much Could a WaterSense RO System Save?

Consider a household using 3 gallons of treated water per day.

With a 5:1 waste ratio:

3 × 365 × 5 = 5,475 gallons of reject water annually.

At the WaterSense maximum of 2.3 gallons reject per gallon treated:

3 × 365 × 2.3 = 2,518.5 gallons of reject water annually.

The difference is:

5,475 − 2,518.5 = 2,956.5 gallons per year.

The actual savings will depend on household usage and the systems being compared.

EPA estimates that choosing a WaterSense-labeled RO system instead of a typical point-of-use RO system can reduce water use by more than 3,100 gallons per year on average.

RO Efficiency vs Recovery: What Is the Difference?

RO specifications can become confusing because manufacturers and certification documents may refer to efficiency and recovery.

Both relate to how much incoming water becomes treated water, but the terminology can depend on system configuration and testing.

EPA’s WaterSense materials distinguish between systems with storage tanks and systems without storage tanks when describing the relevant performance metric.

This means you should not blindly compare a tank system’s efficiency rating with a tankless system’s recovery rating as though they were necessarily measured under identical conditions.

When comparing products, use the certified efficiency information supplied for that specific system.

How to Calculate RO Recovery

A simplified recovery calculation is:

Recovery = treated water ÷ total feed water × 100

For example, suppose an RO system receives 10 gallons of feed water and produces 3 gallons of treated water.

Recovery = 3 ÷ 10 × 100 = 30%

The remaining 7 gallons form the reject stream.

That corresponds to:

7 gallons reject for every 3 gallons treated

or approximately:

2.3 gallons reject for every gallon treated.

EPA’s WaterSense documentation uses this relationship when describing a 30% efficiency/recovery example.

Does a Storage Tank Increase RO Water Waste?

It can affect system efficiency.

Traditional under-sink RO systems often use a pressurized storage tank.

As the tank fills, pressure on the treated-water side can increase. This backpressure can affect membrane operation and the amount of water required to produce additional permeate.

EPA’s technical documentation specifically discusses storage-tank backpressure as a factor affecting RO efficiency.

This is one reason why the design of the system matters when comparing water-use performance.

Do Tankless RO Systems Waste Less Water?

Not automatically.

Tankless systems can be designed for higher efficiency, and some use pumps to maintain membrane pressure.

However, tankless does not itself guarantee low water waste.

Compare the actual certified efficiency or recovery information for the system.

EPA’s WaterSense materials distinguish system configurations when evaluating efficiency and recovery.

See Tank vs Tankless Reverse Osmosis Systems.

Can a Booster Pump Reduce RO Water Waste?

A pump can improve operating conditions by increasing pressure across the RO membrane.

This can potentially improve production and efficiency, depending on the system design.

EPA’s supporting documentation notes that some RO systems use an electric pump and that these systems can operate at higher efficiency levels because the pump helps overcome backpressure from a storage tank.

However, adding a pump to an existing system does not automatically turn it into a high-efficiency RO system.

The complete system must be evaluated.

How Water Pressure Affects RO Waste

RO depends on pressure to force water through the membrane.

If pressure is inadequate, the system may produce treated water more slowly and operate differently from its rated conditions.

Factors affecting the process can include:

  • Incoming water pressure
  • Water temperature
  • Feed-water chemistry
  • Membrane condition
  • Prefilter condition
  • Storage-tank pressure
  • Flow restrictor design
  • System configuration

Therefore, the waste ratio printed in a product specification should not be assumed to remain identical under every household condition.

Does Water Temperature Affect RO Waste?

Water temperature affects RO membrane performance.

Cold water generally passes through an RO membrane more slowly than warmer water under otherwise similar conditions.

This can affect production and the relationship between treated water and reject water.

Consequently, a system’s laboratory rating should not be treated as a guarantee of identical performance throughout the year.

Can Dirty Filters Increase RO Water Waste?

Yes, poor maintenance can affect system performance.

Clogged sediment filters and exhausted prefilters can restrict flow and change the conditions under which the RO membrane operates.

Potential consequences include:

  • Lower production
  • Longer operating periods
  • Changed pressure conditions
  • Poor membrane protection
  • Reduced overall efficiency

Regular filter replacement is therefore part of maintaining efficient RO operation.

What Does the Flow Restrictor Do?

A flow restrictor helps control the concentrate stream leaving the RO membrane.

It contributes to maintaining the pressure conditions required for the membrane to operate.

If it is incorrectly sized, damaged, removed or replaced with an inappropriate component, system performance can change.

Do not modify the restrictor simply to reduce drain flow without understanding the effect on membrane performance.

How Does an Automatic Shutoff Valve Reduce Water Waste?

Traditional tank RO systems can continue sending water toward the drain while the system is producing water.

An automatic shutoff mechanism can stop the feed-water flow when the storage tank reaches its intended operating condition.

This prevents unnecessary continued operation when the system no longer needs to produce additional permeate.

EPA’s WaterSense specification includes automatic shutoff requirements for qualifying systems.

Is RO Reject Water the Same as a Leak?

No.

Reject water is an intentional part of the RO process.

A leak is uncontrolled water escaping from the plumbing or equipment.

A properly operating RO system can therefore send water down the drain without having a leak.

However, continuous drain flow when the system should be shut off can indicate a problem with:

  • Automatic shutoff
  • Storage tank pressure
  • Check valve
  • Flow restrictor
  • Membrane condition
  • Other system components

Why Is My RO System Continuously Sending Water Down the Drain?

Continuous drain flow is not necessarily normal.

Possible causes include:

  • Full or improperly pressurized storage tank
  • Faulty automatic shutoff valve
  • Incorrect tank pressure
  • Clogged filters
  • Membrane problems
  • Check-valve problems
  • Incorrect flow restrictor
  • Low incoming pressure

If the system continues running when it should be shut off, follow the manufacturer’s troubleshooting procedure.

Can RO Reject Water Be Reused?

In some homes, reject water can potentially be collected and reused for suitable non-potable purposes.

Possible uses may include:

  • Toilet flushing
  • Cleaning
  • Mopping
  • Outdoor cleaning
  • Some gardening applications

However, reject water contains a higher concentration of dissolved substances than the feed water, so it should not automatically be used for every purpose.

Consider the source-water chemistry and the intended use.

Can RO Reject Water Be Used for Plants?

There is no universal yes-or-no answer.

The reject stream is more concentrated than the original feed water and can therefore contain elevated concentrations of dissolved substances.

Whether it is appropriate for plants depends on factors such as:

  • Plant species
  • Soil conditions
  • Source-water chemistry
  • Reject-water TDS
  • Frequency of use

If you do not know the water chemistry, avoid assuming that concentrated RO reject water is suitable for sensitive plants.

Can RO Reject Water Be Used for Laundry?

Potentially, but the practicality depends on how the system is installed and the chemistry of the reject water.

Because reject water contains concentrated dissolved substances, it should not automatically be treated as equivalent to ordinary tap water.

For routine household reuse, simpler applications such as cleaning or toilet flushing may be easier to manage.

Can You Send RO Reject Water to a Rainwater Tank?

This requires caution.

RO reject water is not the same as rainwater, and the feasibility of directing it into a storage system depends on the system design and local plumbing requirements.

Do not cross-connect potable and non-potable systems without appropriate backflow protection and professional guidance.

Why Does RO Send Water Down the Drain Instead of Recycling It?

The concentrate stream carries away substances rejected by the membrane.

If that stream were simply sent repeatedly back through the membrane, dissolved contaminants would become progressively concentrated in the feed water.

That can increase scaling and fouling and reduce membrane performance.

RO systems therefore normally discharge at least some concentrate rather than endlessly recycling the same water.

Can RO Systems Recycle Reject Water?

Some advanced system designs can use internal recovery strategies to reduce water loss.

However, increasing recovery is not simply a matter of sending all reject water back through the membrane.

As recovery increases, the concentration of rejected substances in the feed stream can increase as well.

That can affect:

  • Scaling
  • Membrane fouling
  • Water chemistry
  • Membrane life
  • System maintenance

Efficient RO design therefore requires balancing water recovery with reliable membrane operation.

Does Better RO Efficiency Mean Worse Filtration?

Not necessarily.

A well-designed efficient RO system can reduce water waste while still meeting applicable performance requirements.

EPA’s WaterSense program was specifically created to identify more water-efficient POU RO systems while maintaining treatment performance requirements.

However, you should still verify the specific contaminant claims for the system.

Efficiency and contaminant removal are separate characteristics.

Water Efficiency Is Not the Same as Filtration Performance

When comparing RO systems, evaluate at least two separate questions:

1. How effectively does the system treat the contaminants I care about?

2. How much water does it use to produce the treated water?

A system can have excellent contaminant performance but poor water efficiency.

Conversely, a system can be water-efficient but not have the contaminant claim you need.

The best system combines both.

Would a Carbon Filter Eliminate RO Water Waste?

For the contaminants that carbon filtration can appropriately address, a carbon filter may avoid the RO membrane’s reject-water stream.

This is one reason EPA does not intend the WaterSense RO program to encourage every household to install RO.

EPA notes that some treatment methods, including filtration, can address certain treatment needs without generating the same water waste associated with RO.

If your only concern is chlorine taste and odor, for example, a properly selected carbon filter may be a simpler option.

See Reverse Osmosis vs Carbon Filtration for U.S. Tap Water.

Does Every Home Need RO?

No.

This is one of the most important points in understanding RO water waste.

If your water-quality concern can be solved by a treatment technology that does not generate reject water, that option may be more efficient overall.

RO makes more sense when its broader dissolved-contaminant treatment capability addresses a genuine household need.

EPA explicitly states that WaterSense is not intended to promote RO for all applications.

How to Calculate Your Own RO Water Waste

First determine how much RO-treated water your household uses per day.

Include:

  • Drinking
  • Cooking
  • Coffee
  • Tea
  • Ice
  • Refrigerator dispenser use
  • Other uses supplied by the RO system

Then identify the system’s waste-to-product ratio.

Use:

Annual reject water = daily treated water × 365 × waste ratio

For example:

4 gallons/day × 365 × 3 = 4,380 gallons/year.

If you replace the system with one operating at 2.3:1:

4 × 365 × 2.3 = 3,358 gallons/year.

Potential difference:

1,022 gallons/year.

RO Waste by Household Size

Household size matters because more people generally means more drinking and cooking water.

Household Example RO Use 5:1 Reject 2.3:1 Reject
1 person 1 gal/day 1,825 gal/year 840 gal/year
2 people 2 gal/day 3,650 gal/year 1,679 gal/year
4 people 4 gal/day 7,300 gal/year 3,358 gal/year
6 people 6 gal/day 10,950 gal/year 5,037 gal/year

These are examples, not predictions of actual household consumption.

Does RO Water Waste Increase Your Water Bill?

Potentially.

Reject water is water that entered your home and was subsequently discharged rather than becoming treated drinking water.

Therefore, higher reject-water volumes can increase water consumption and, depending on your utility’s rate structure, potentially increase your water bill.

Some utilities also charge wastewater or sewer fees based partly on metered water consumption.

The exact financial impact varies by location.

See How Much Does a Reverse Osmosis System Cost in the USA?

How to Calculate the Cost of RO Reject Water

A simplified calculation is:

Annual reject-water cost = annual reject gallons ÷ 1,000 × local water/sewer cost per 1,000 gallons

For example, suppose your system produces 5,000 gallons of reject water per year and your combined applicable water and sewer charge is $10 per 1,000 gallons.

5,000 ÷ 1,000 × $10 = $50 per year.

Your actual bill may use tiered rates, fixed charges or separate water and wastewater calculations, so treat this as an estimate.

Why RO Water Waste Matters More in Water-Stressed Areas

The environmental impact of RO reject water depends partly on local water conditions.

Using several thousand additional gallons per year may be relatively minor for one household in a water-abundant area but more significant in a drought-prone or water-stressed region.

This is one reason water efficiency should be considered alongside contaminant-removal performance.

What Factors Affect RO Water Efficiency?

  • Membrane design: Different membranes have different operating characteristics.
  • Feed pressure: Pressure influences membrane production.
  • Water temperature: Temperature affects permeate flow.
  • Feed-water chemistry: Dissolved substances can influence membrane behavior.
  • Storage tank: Tank pressure can affect production conditions.
  • Flow restrictor: Incorrect flow control can change system performance.
  • Prefilters: Clogged filters can restrict flow.
  • Membrane age: Membrane condition can affect performance.
  • Automatic shutoff: Proper shutoff prevents unnecessary operation.
  • Pump: Some systems use pumps to improve operating pressure.
  • Automatic flushing: Certain designs use additional water during flushing.

Does Automatic Membrane Flushing Waste More Water?

Some RO systems periodically flush the membrane.

Flushing can help address membrane fouling or concentration buildup, depending on the system design.

However, flushing itself can use additional water.

When comparing systems, check whether the published efficiency figure accounts for the system’s normal flushing behavior.

This is particularly important for electronically controlled or tankless systems with automatic flushing cycles.

Can Maintenance Improve RO Water Efficiency?

Maintenance cannot transform a fundamentally inefficient system into a highly efficient one, but it can help a system continue operating close to its intended performance.

Important maintenance includes:

  • Replacing sediment filters
  • Replacing carbon prefilters
  • Replacing postfilters
  • Replacing the membrane when required
  • Checking for leaks
  • Checking drain flow when appropriate
  • Maintaining proper tank pressure where applicable

A neglected RO system can develop performance problems that increase operating time and reduce useful production.

How to Tell if Your RO System Is Becoming Less Efficient

Potential warning signs include:

  • Much slower treated-water production
  • Continuous drain flow
  • Unexpected changes in treated-water quality
  • Frequent cycling
  • Reduced flow at the drinking faucet
  • Longer time required to fill the storage tank

These symptoms can have several causes, so troubleshoot the complete system rather than assuming the membrane is responsible.

What Is the Most Water-Efficient RO System?

For U.S. consumers, a practical starting point is to look for an EPA WaterSense-labeled point-of-use RO system.

WaterSense-labeled POU RO systems must meet EPA’s water-efficiency criteria and be independently certified. The current requirement limits reject water to 2.3 gallons or less per gallon of treated water.

That does not mean every WaterSense system is identical.

You should still compare:

  • Contaminant claims
  • Daily production
  • Efficiency
  • Filter costs
  • Membrane costs
  • Installation requirements
  • Noise
  • Tank versus tankless design

How to Compare RO Systems by Water Waste

Specification What to Look For
WaterSense label Strong first filter for water efficiency
Waste-to-product ratio Lower is better
Efficiency rating Compare within compatible system configurations
Recovery rating Especially relevant to certain tankless configurations
Daily production Must meet household demand
Automatic shutoff Important for reducing unnecessary operation
Pump Can help operating pressure depending on design
Filter condition Maintenance affects performance
Membrane condition Old membranes can reduce performance

Water-Efficient RO Buying Checklist

  • ☐ Confirm that you actually need RO.
  • ☐ Identify the contaminants you want to reduce.
  • ☐ Verify NSF/ANSI 58 certification.
  • ☐ Verify the specific contaminant claims.
  • ☐ Look for the EPA WaterSense label.
  • ☐ Check the waste-to-product ratio.
  • ☐ Check the efficiency/recovery information.
  • ☐ Check whether the system has a storage tank.
  • ☐ Check daily production.
  • ☐ Check minimum operating pressure.
  • ☐ Check whether a pump is included.
  • ☐ Check automatic shutoff.
  • ☐ Check automatic flushing behavior.
  • ☐ Calculate annual reject-water volume.
  • ☐ Estimate the local water/sewer cost.
  • ☐ Compare replacement-filter costs.

RO Water-Waste Decision Guide

Do you actually need RO?

→ No → Consider a lower-water-use treatment technology.

→ Yes → Continue.

Is the RO system WaterSense labeled?

→ Yes → Continue comparing its contaminant claims and ownership cost.

→ No → Compare its actual efficiency carefully against WaterSense alternatives.

Does the system produce 2.3 gallons or less of reject per gallon treated?

→ Yes → It meets the WaterSense water-efficiency threshold, assuming it is properly certified and labeled.

→ No → Determine whether the additional water consumption is justified by another system advantage.

Is your household’s RO demand high?

→ Yes → Efficiency becomes increasingly important.

→ No → Still compare efficiency, especially if water costs are high.

Frequently Asked Questions

How much water does a reverse osmosis system waste?

A typical point-of-use RO system can send five gallons or more down the drain for every gallon of treated water it produces. Some inefficient systems can use up to about 10 gallons of reject water per gallon treated.

How much water does a WaterSense RO system waste?

A WaterSense-labeled point-of-use RO system must send no more than 2.3 gallons down the drain for every gallon of treated water it produces.

Is 2.3 gallons of waste per gallon of RO water good?

It is substantially better than the typical five-gallon-or-more waste level EPA reports for conventional point-of-use RO systems. However, it is still more water-intensive than many filtration technologies that do not generate an RO reject stream.

Does every RO system waste water?

Conventional RO systems generate a reject stream because the membrane separates water into permeate and concentrate. System designs can reduce the amount of reject water, but RO should not be assumed to have zero water waste.

Does tankless RO waste less water?

Not automatically. Tankless systems can be designed for high efficiency, but the actual efficiency or recovery specification should be compared for each model.

Does a booster pump reduce RO waste?

A pump can improve membrane operating pressure and may improve efficiency depending on the complete system design. It does not automatically make every RO system water-efficient.

Why does my RO system waste so much water?

Possible reasons include the system’s design, low pressure, storage-tank backpressure, membrane condition, filter condition, flow-restrictor configuration and automatic flushing.

Can RO reject water be reused?

It can potentially be reused for suitable non-potable purposes, but the water contains concentrated dissolved substances. Its suitability depends on the source-water chemistry and intended use.

Can I use RO reject water for gardening?

Sometimes, but do not assume it is suitable for all plants. Because dissolved substances are concentrated in the reject stream, sensitive plants may be affected depending on the water chemistry.

Can RO reject water be used for toilet flushing?

It can be a practical non-potable reuse option when collected and installed appropriately. Avoid creating cross-connections with potable plumbing.

Does RO water waste increase my water bill?

It can. The reject water contributes to the home’s metered water consumption, and some utilities also apply wastewater charges based on water use.

Does WaterSense mean an RO system removes more contaminants?

No. WaterSense primarily addresses water efficiency and related performance requirements. You must still verify the RO system’s specific contaminant-reduction certifications.

Is RO more wasteful than a carbon filter?

Generally, yes from the perspective of the treatment process itself, because conventional carbon filtration does not normally produce an RO-style reject stream.

Should I avoid RO because it wastes water?

Not necessarily. If RO is the appropriate technology for a contaminant problem, choose an efficient system rather than abandoning RO solely because some systems waste substantial amounts of water.

Does a higher GPD rating mean less water waste?

No. GPD describes rated production capacity, while water efficiency describes how much feed water becomes useful treated water.

Can changing the flow restrictor reduce water waste?

Do not modify the flow restrictor simply to reduce drain flow. Incorrect flow control can affect membrane pressure and treatment performance. Use components specified for the system.

Can a dirty RO filter increase water waste?

It can affect flow and system operating conditions. Regular maintenance helps the system continue operating as designed.

How can I reduce RO water waste?

  • Choose a WaterSense-labeled RO system.
  • Maintain filters and the membrane.
  • Ensure adequate feed pressure.
  • Check for continuous drain flow.
  • Use the correct flow-control components.
  • Reuse reject water where appropriate.
  • Avoid using RO for applications that do not require RO-treated water.

Final Verdict: How Much RO Water Waste Is Acceptable?

There is no single waste ratio that makes an RO system appropriate or inappropriate for every American household.

But there is a major difference between an RO system that sends five or more gallons down the drain for every gallon treated and one that sends 2.3 gallons or less.

EPA’s WaterSense program provides an easy way to identify point-of-use RO systems designed around a lower water-waste threshold.

If you need RO, the sensible approach is:

  1. Identify the actual water-treatment problem.
  2. Confirm that RO is appropriate.
  3. Compare contaminant-specific certification.
  4. Compare water efficiency.
  5. Calculate your expected annual water use.
  6. Consider tank versus tankless design.
  7. Maintain the system properly.
  8. Reuse reject water where appropriate.

The most important lesson is that “reverse osmosis” does not tell you how much water a system wastes.

You need to look at the actual efficiency or waste-to-product specification.

And if you are already committed to buying an RO system, an EPA WaterSense-labeled model is a strong starting point for reducing unnecessary water consumption.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top